Accueil TV & HIGH TECH Accessoires High TechTP4056 5V 1A Type-c Input Interface USB 18650 Lithium Battery Charging Board Charger Module with Dual Protection Functions

TP4056 5V 1A Type-c Input Interface USB 18650 Lithium Battery Charging Board Charger Module with Dual Protection Functions

35.00 Dhs - 99.00 Dhs

50.00 Dhs - 150.00 Dhs35%

Quelques variantes avec peu de stock

+ livraison à partir de 12.00 Dhs vers CASABLANCA - Anfa

3 out of 5

(2 avis vérifiés)

Options disponibles

3-5V1A5-5V1A10-5V1A

Promotions

Les commandes Jumia Express sont éligibles à la livraison gratuite. Offre soumise à conditions

Signaler des informations incorrectes liées au produit

Livraison & Retours

Choisissez le lieu

Point relais

Frais de livraison 12.00 Dhs

Prêt pour le retrait entre 22 mai et 23 mai si vous commandez dans les prochaines 20hrs 3mins

Livraison à domicile

Frais de livraison 22.00 Dhs

Prêt pour livraison entre 22 mai et 23 mai si vous commandez dans les prochaines 20hrs 3mins

Politique de retour

Retour gratuit dans les 7 jours suivant la date de livraison.Détails

Informations sur le vendeur

Electronic Omar

72%Évaluation du vendeur

8 Abonnés

Suivre

Performance vendeur

Vitesse d'expédition: Excellent

Score Qualité: Excellent

Avis des consommateurs: Très Mauvais

Détails

TP4056 5V 1A Type-c Input Interface USB 18650 Lithium Battery Charging Board Charger Module with Dual Protection Functions

Product introduction:

Charging protection, prevent battery overcharge and over discharge, and automatically control the charging current to better protect the battery; type-c female interface, retaining input voltage solder joints, convenient DIY.

Product parameters:

Input voltage: 4.5V-5V

Maximum charging current: 1000mA

Charge cut-off voltage: 4.2V soil 1%

Battery over-discharge protection voltage: 2.5V/3A

How to use:

1. The Type-C master and the +-pad of its side are the power input, and the 5V input voltage, B + lithium battery positive plate, B-lithium battery negative electrode.
2. OUT +, OUT - Take the load, such as moving the roll-off board is negative or other load. Connect the battery to B +, B-, insert the phone charger to USB female seat, red light is on charging, blue light is bright.
3. When the input is input, the current is obtained from the power supply output.
4. If no power is not connected, the current is obtained from the battery, and the battery voltage is lower than 2. 5V, the output is automatically turned off.

Fiche technique

Principales caractéristiques

Precautions:

1. When you first access the battery, you may have an output voltage output without voltage, you need to access 5V charge and activate the protection circuit on the power input.
2. When powering with a mobile phone charger, you must output 1A or more, otherwise it may not be charged normally.
3. The load on the OUT side should be disconnected when charging.

Note: The module only work with a USB to USB-C, don't support USB-C to USB-C charge