TP4056 5V 1A Type-c Input Interface USB 18650 Lithium Battery Charging Board Charger Module with Dual Protection Functions

TP4056 5V 1A Type-c Input Interface USB 18650 Lithium Battery Charging Board Charger Module with Dual Protection Functions

Product introduction:

Charging protection, prevent battery overcharge and over discharge, and automatically control the charging current to better protect the battery; type-c female interface, retaining input voltage solder joints, convenient DIY.

Product parameters:

Input voltage: 4.5V-5V

Maximum charging current: 1000mA

Charge cut-off voltage: 4.2V soil 1%

Battery over-discharge protection voltage: 2.5V/3A

How to use:

• 1. The Type-C master and the +-pad of its side are the power input, and the 5V input voltage, B + lithium battery positive plate, B-lithium battery negative electrode.
• 2. OUT +, OUT - Take the load, such as moving the roll-off board is negative or other load. Connect the battery to B +, B-, insert the phone charger to USB female seat, red light is on charging, blue light is bright.
• 3. When the input is input, the current is obtained from the power supply output.
• 4. If no power is not connected, the current is obtained from the battery, and the battery voltage is lower than 2. 5V, the output is automatically turned off.